JXF type Lighting Distribution Box

Product introduction

JXF series wall-mounted box is a type of distribution box with various control functions,which is designed and assembled according to component models,specifications and quantity.Owing to diversified box sizes and specifica- tions,different boxes can be chosen according to the sizes of mounting components,so that the structure can be compact to a considerable degree.It can be mounted in thewall with see-through window anddoor.The door panel is covered with an airtight rubber strip to prevent rainwater infiltration.The cabinet is equipped with a lower outlet hole.A  sealing plate is installed at the factory.

Overall dimension

Note:Above  dimensions  are  for  reference  only.It  can  be  manufactured  according  to  the  drawings  provided  by  the  user.

Introduction to Stainless Steel JXF Control Cabinet

It is suitable for circuitswith AC frequency 50Hz,rated working voltage 500V and below.Under special require-  ments,the protection level can reach  IP55.There are through-holes on the  upper and  lower sides of the cabinet   Flexible perforated panel can be reserved for multi-tube incoming lines.The maximum rated current can reach 400A, whichis especially suitable for metering control boxes for factories,mines,hotels and residential buildings.

Normal Service Conditions

1.Temperature:The ambient air temperature cannot exceed+40°C,and the ambient air temperature lower limit  is-5°C.

2.Humidity:At  a  maximum  temperature  of+40°C,the  relative  humidity  of  the  air  should  not  exceed  50%,and  higher  relative  humidity  at  lower  temperatures  is  allowed,such  as  90%at+20°C.

3.Elevation:The altitude ofthe installation site should not exceed 2000m.

4.Installation Category:H Class

5.Pollution  Degree:Level  3

6.Rated Working Voltage:230V 400V

7.Rate Working Voltage:400A

8.Rated Short Circuit Breaking Capacity:80kA

9.Enclosure Protection Class:IP55