Product introduction
The product isn full-filled sealed,sealed with the principle of power transformers.Based amorphous alloy elements are iron,nickel,cobalt,silicon,boron,carbon and other components,is a soft isotronpic materials,magnetic power is small,there is no domain wall movement impede structural defects,the thickness of very thin,only 0.027mm,the corresponding fling factor smaller,only 0.75 to 0.8,resistivity is high,is the silicon steel plates 3 to 6 times,5times the hardness of the silicon steel,amorphous alloys are particularly sensitive to stress.
S(B)H-M series load loss products based on the standard value in the GB/T6451 down 15%,no-load loss in GB/T6451 based on the standard set of I values decreased by 70%.Implementation of standard JB/T10318"oil-imm- ersed distribution transformer amorphous alloy core technical parameters"and GB20050-2020 power transformer limited value of energy efficiency and energy efficiency level".
Technical parameters
S(B)H15-M-30-2500/6-10 non-excitation voltage-type distribution transformers
额定容量 Rated Capacity (kVA) | 电压组合及分接范围 Voltage combination | 联结组标号 Connection group symbol | 空载损耗 No-load loss (W) | 负载损耗 Load loss (75℃) (W) | 空载电流 No-load current % | 短路阻抗 Short- circuit impedance% | ||
高压(H.V.) (kV) | 高压分接范围 High pressure tapping range% | 低压(L.V.) (kV) | ||||||
30 | 6.3 10 10.5 11 | ±2×2.5 ±5 | 0.4 | Dynl1 | 33 | 630/600 | 1.5 | 4.0 |
50 | 43 | 910/870 | 1.2 | |||||
63 | 50 | 1090/1040 | 1.1 | |||||
80 | 60 | 1310/1250 | 1.0 | |||||
100 | 75 | 1580/1500 | 0.9 | |||||
125 | 85 | 1890/1800 | 0.8 | |||||
160 | 100 | 2310/2200 | 0.6 | |||||
200 | 120 | 2730/2600 | 0.6 | |||||
250 | 140 | 3200/3050 | 0.6 | |||||
315 | 170 | 3830/3650 | 0.5 | |||||
400 | 200 | 4520/4300 | 0.5 | |||||
500 | 240 | 5410/5150 | 0.5 | |||||
630 | 320 | 6200 | 0.3 | 4.5 | ||||
800 | 380 | 7500 | 0.3 | |||||
1000 | 450 | 10300 | 0.3 | |||||
1250 | 530 | 12000 | 0.2 | |||||
1600 | 630 | 14500 | 0.2 | |||||
2000 | 720 | 18300 | 0.2 | 5.0 | ||||
2500 | 860 | 21200 | 0.2 | |||||
S(B)H21-M-30-2500/6-10 non-excitation voltage-type distribution transformers
额定容量 Rated Capacity (kVA) | 电压组合及分接范围 Voltage combination | 联结组标号 Connection group symbol | 空载损耗 No-load loss (W) | 负载损耗 Load loss (75℃) (W) | 空载电流 No-load current % | 短路阻抗 Short- circuit impedance% | ||
高压(H.V.) (kV) | 高压分接范围 High pressure tapping range% | 低压(L.V.) (kV) | ||||||
30 | 6 6.3 10 10.5 11 | ±2×2.5 ±5 | 0.4 | Dynl1 | 33 | 535/510 | 1.5 | 4.0 |
50 | 43 | 780/745 | 1.2 | |||||
63 | 50 | 930/890 | 1.1 | |||||
80 | 60 | 1120/1070 | 1.0 | |||||
100 | 75 | 1310/1250 | 0.9 | |||||
125 | 85 | 1615/1540 | 0.8 | |||||
160 | 100 | 1975/1880 | 0.6 | |||||
200 | 120 | 2330/2225 | 0.6 | |||||
250 | 140 | 2735/2610 | 0.6 | |||||
315 | 170 | 3275/3120 | 0.5 | |||||
额定容量 Rated Capacity (kVA) | 电压组合及分接范围 Voltage combination | 联结组标号 Connection group symbol | 空载损耗 No-load loss (W) | 负载损耗 Load loss (75℃) (W) | 空载电流 No-load current % | 短路阻抗 Short- circuit impedance% | ||
高压(H.V.) (kV) | 高压分接范围 High pressure tapping range% | 低压(L.V.) (kV) | ||||||
400 | 6 6.3 10 10.5 11 | ±2×2.5 ±5 | 0.4 | Dynl1 | 200 | 3865/3675 | 0.5 | 4.0 |
500 | 240 | 4625/4400 | 0.5 | |||||
630 | 320 | 5300 | 0.3 | 4.5 | ||||
800 | 380 | 6415 | 0.3 | |||||
1000 | 450 | 8800 | 0.3 | |||||
1250 | 530 | 10260 | 0.2 | |||||
1600 | 630 | 12400 | 0.2 | |||||
2000 | 710 | 14800 | 0.2 | 5.0 | ||||
2500 | 860 | 16300 | 0.2 | |||||
S(B)H25-M sealed type amorphous alloy power transformer technology data sheet
额定容量 Rated Capacity (kVA) | 电压组合及分接范围 Voltage combination | 联结组标号 Connection group symbol | 空载损耗 No-load loss (W) | 负载损耗 Load loss (75℃) (W) | 空载电流 No-load current % | 短路阻抗 Short- circuit impedance% | ||
高压(H.V.) (kV) | 高压分接范围 High pressure tapping range% | 低压(L.V.) (kV) | ||||||
30 | 6 6.3 10 10.5 11 | ±2×2.5 ±5 | 0.4 | Dynll | 25 | 510/480 | 1.5 | 4.0 |
50 | 35 | 735/700 | 1.2 | |||||
63 | 40 | 880/840 | 1.1 | |||||
80 | 50 | 1060/1010 | 1.0 | |||||
100 | 60 | 1270/1215 | 0.9 | |||||
125 | 70 | 1530/1450 | 0.8 | |||||
160 | 80 | 1870/1780 | 0.6 | |||||
200 | 95 | 2210/2100 | 0.6 | |||||
250 | 110 | 2590/2470 | 0.6 | |||||
315 | 135 | 3100/2950 | 0.5 | |||||
400 | 160 | 3660/3480 | 0.5 | |||||
500 | 190 | 4380/4170 | 0.5 | |||||
630 | 250 | 5020 | 0.3 | 4.5 | ||||
800 | 300 | 6075 | 0.3 | |||||
1000 | 360 | 8340 | 0.3 | |||||
1250 | 425 | 9720 | 0.2 | |||||
1600 | 500 | 11745 | 0.2 | |||||
2000 | 550 | 14000 | 0.2 | 5.0 | ||||
2500 | 670 | 15450 | 0.2 | |||||
S(B)H16-M sealed type amorphous alloy power transformer technology data sheet
额定容量 Rated Capacity (kVA) | 电压组合及分接范围 Voltage combination | 联结组标号 Connection group symbol | 空载损耗 No-load loss (W) | 负载损耗 Load loss (75℃) (W) | 空载电流 No-load current % | 短路阻抗 Short- circuit impedance% | ||
高压(H.V.) (kV) | 高压分接范围 High pressure tapping range% | 低压(L.V.) (kV) | ||||||
30 | 6.3 10 10.5 11 | ±2×2.5 ±5 | 0.4 | Dynl1 | 33 | 565/540 | 1.5 | 4.0 |
50 | 43 | 820/785 | 1.2 | |||||
63 | 50 | 980/935 | 1.1 | |||||
80 | 60 | 1180/1120 | 1.0 | |||||
100 | 75 | 1420/1350 | 0.9 | |||||
125 | 85 | 1700/1620 | 0.8 | |||||
160 | 100 | 2080/1980 | 0.6 | |||||
200 | 120 | 2450/2340 | 0.6 | |||||
250 | 140 | 2880/2740 | 0.6 | |||||
315 | 170 | 3445/3280 | 0.5 | |||||
400 | 200 | 4070/3870 | 0.5 | |||||
500 | 240 | 4870/4630 | 0.5 | |||||
630 | 320 | 5580 | 0.3 | 4.5 | ||||
800 | 380 | 6750 | 0.3 | |||||
1000 | 450 | 9270 | 0.3 | |||||
1250 | 530 | 10800 | 0.2 | |||||
1600 | 630 | 13000 | 0.2 | |||||
2000 | 750 | 16400 | 0.2 | 5.0 | ||||
2500 | 900 | 19000 | 0.2 | |||||
Note:the load loss values in the table to the left of the slash applies to Dyn11 or Yzn11 Connection Group,a slash to theright of) the load ioss values apply to Connection Group Yyn0.
Sweep and follow our latest news Work Time：Monday to Friday 9:00-18:00
Contact：Mr TianFeng
Mobile：+86-139212208
Email：281858503@qq.com
Address：Room 302, Building 7, International(HeBi) Pioneer Park, HeBi City, HeNan Province，China
